- 0
-
Похожий контент
-
От admin
Сбрасывал ли кто-нибудь ланчем адаптацию топливной системы delphi на реношном моторе k9k? В клипе эта команда называется RZ004 "Адаптивные параметры регулирования давления". Все меню перекопал не нашел.
-
От guvensensoy
View file Delphi Cars 2016.1
-TURN OFF your internet connection!
-Shut down antivirus software!
-Delete all files about the old version!
1, copy "Delphi cars 2016.R1" to your computer.
2, run main.exe in "Delphi cars 2016.R1" to activate ¨if you want to install truck, please copy delphi cdp + trucks 100251 Installation to Delphi cars 2016.R1)
- click start
- click yes to save FileActivation on desk
- the send the FileActivation to your seller, the then the ask your seller the send back the FileActivation actived
- the click start again
- the click the no to the open the FileActivation actived
-: wait for the complete the install, enjoy!
note:
1, the if your computer first ds150e the install software, the install you a must usb driver (main unit
link to computer to the install) .USB driver is in "Delphi cars 2016.R1 \ Driver"
2, if you can not run main. exe.please install Netframe3.5 or doNET_4.6.1_install
3, if there is a firmware update!
Added by guvensensoy Added by 05/10/2019 Category Multi-Brand Scanners
-
От guvensensoy
-TURN OFF your internet connection!
-Shut down antivirus software!
-Delete all files about the old version!
1,copy "Delphi cars 2016.R1" to your computer.
2,run main.exe in "Delphi cars 2016.R1" to activate£¨if you want to install truck ,please copy delphi cdp+ trucks 100251 Installation to Delphi cars 2016.R1)
- click start
- click yes to save FileActivation on desk
- send the FileActivation to your seller ,then ask your seller send back the FileActivation actived
- click start again
- click no to open the FileActivation actived
- wait for install complete,enjoy!
note:
1,if your computer first install ds150e software,you must install usb driver(main unit
link to computer to install).usb driver is in "Delphi cars 2016.R1\Driver"
2,if you can't run main.exe.please install Netframe3.5 or doNET_4.6.1_install
3,if your main unit firmware is old, you must link main unit to car then updata firmware!
-
От Mike55
Thought i would share this program with you guys.
It is fully activated and patched, custom installer to simplify installation.
Just install and you're ready to work.
I use it on daily basis to make living for myself, it is awesome
I got it from this guy.
-
Всем привет,
есть китайский DS150E двухплатный и Delphi 2013.3 или WoW 5.008 - не могу прочитать Pajero sport II 2007 дизель 4D56T. Информации никакой чето на этот счет не могу найти - требуется помощь.
Другие машины читаются нормально Peugeot 206 и Partner , Renault Scenic II дизель, Polo sedan, Nissan Qashqai - ok
psИли там проблема в 150 с k-line и проще приобщится через easydiag?
Поделиться сообщением
Ссылка на сообщение